Unsubscribe-Header-1

Amber Technology Blog

WyreStorm 18Gbps 4K HDR AVX Extender with eARC, Audio Breakout & PoE

Posted by Karin Cahill

14/10/21 08:34

Extend 18Gbps A/V signals up to 100 meters with the EX-100-H2-EARC.

This extender uses AVX technology, a similar transmission that is found inside our powerful NetworkHD 600 series, to send 4K HDR and Dolby Vision content at 60Hz. Compatible with eARC, you can transmit audio signals such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 signals from a smart TV back to an eARC enabled AVR or soundbar. Flexible control passthrough options including IR, RS-232 and LAN allow you control a display and get devices connected over long distances.

4K HDR & DOLBY VISION

Sporting an 18Gbps HDMI input, the EX-100-H2-EARC can support all UHD video signals up to and including 2160p 4:4:4/60, and high framerate HDR 12bit 4:2:2 up to 60Hz.

EARC

Equipped with eARC capability, send high-bitrate audio formats such as Dolby Atmos or DTS:X from an eARC display back to an AVR or soundbar through native HDMI. Let’s not forget backwards compatibility with standard ARC as well.

FLEXIBLE CONTROL

Passthrough signals such as IR and RS-232 from a control system to control your display or other AV equipment. The ethernet passthrough supports full 1Gbps speeds for extending internet or LAN connections.

Power Over Ethernet

A standard feature in most WyreStorm extenders, simply power the transmitter side of the extender and the receiver will power over the category cable. Reducing points of failure and making installation easier.

  • Supports the latest UHD resolutions including HDR10, HLG and Dolby Vision formats
  • Extend 18Gbps content up to 100 meters using Cat6a cabling or higher
  • Compatible with eARC displays for transmitting high-bitrate audio formats including Dolby Atmos and DTS:X
  • Backwards compatible with standard ARC
  • Uses powerful AVX transmission technology
  • Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation
  • PoE allows the transmitter to power the receiver over category cable
  • 3 audio modes configured by dipswitches: eARC, S/PDIF passthrough, HDMI input de-embed
  • Control signal passthrough via bidirectional IR, 2-way RS-232 and Gigabit LAN

 

To locate a WyreStorm dealer click here.

To speak to someone from our friendly WyreStorm team, click here.

WyreStormLogo

Topics: AUS, NZ, extendersolution, audiobreakout

   

Recent Posts

Posts by Topic

see all
Amber Technology Blog